[cisco-voip] direct inward dial over isdn BRI

[Aykut NURAT]

Jonathan,
I did not make any config indeed, i just wondered whether it is possible
or not.
I understand it is possible from Zoltan's message.
I ll use the information while trying to configure.

Many thanks for the replies,
Aykut

-----Original Message-----
From: Kelemen Zoltan [mailto:keli at carocomp.ro] 
Sent: Monday, March 17, 2008 4:43 PM
To: Jonathan Charles
Cc: Aykut NURAT; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] direct inward dial over isdn BRI

Use voice translation-rules and voice translation-profiles for the 
incoming numbers then apply them to the BRI voice-ports as incoming 
profiles.

Since it's ISDN, you will receive the incoming called number, that you 
can translate.

regards,
   Zoltan

Jonathan Charles wrote:
> H323 or MGCP?
>
> Do a debug isdn q931 and call the numbers, do you see 'called party
> number' in the debug?
>
>
>
> Jonathan
>
> On Mon, Mar 17, 2008 at 6:42 AM, Aykut NURAT <aykut.nurat at asay.com.tr>
wrote:
>   
>> Hi Everyone,
>>
>>  We have a BRI PSTN line on my ccme 4.0 router with 4 Multiple
Subscriber
>>  Number. I want to direct calls from outside to each msn number to a
>>  different ip telephone registered to my ccme.
>>
>>  Has anyone done a similar config before?
>>
>>  I have made a search but coulnd't find anything, yet, hence any
>>  information will be appreciated.
>>
>>
>>  Best,
>>  Aykut
>>  _______________________________________________
>>  cisco-voip mailing list
>>  cisco-voip at puck.nether.net
>>  https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>     
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>