[cisco-voip] TAPS Cisco Call Manager 6.1

[James Buchanan]

Are the CTI ports in a partition accessible from the CSS assigned to the
phone you are dialing from?

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Akaal singh
Sent: Monday, March 17, 2008 5:22 PM
To: Jonathan Charles; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] TAPS Cisco Call Manager 6.1

I have created the trigger, TAPS rp, all phones are part of TAPS CSS.
When I connect a Phone the phone dials the TAPS number but I get a
busy signal. Also everything is registed with call manager. I have
restarted devices as well.

A bit lost.....


On 17/03/2008, Jonathan Charles <jonvoip at gmail.com> wrote:
> Did you create a trigger, is the CTI RP (as well as the CTI Ports)
> registered with CCM?
>
> Does the phone have a CSS to call the partition that that trigger is
in?
>
> Are you using G729?
>
>
> Jonathan
>
> On Mon, Mar 17, 2008 at 11:34 AM, Akaal singh
<akaalvoip at googlemail.com>
> wrote:
> > Hi,
> >
> > I am having problems with TAPS on CCM 6.1, every time we try to call
the
> > TAPS number we get a busy line, everything looks like its configured
right
> > could some one please help me out with this.
> > Thank you
> >
> >
> > _______________________________________________
> >  cisco-voip mailing list
> >  cisco-voip at puck.nether.net
> >  https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip