[cisco-voip] Interdigit Timeout on Translation

[Daniel Rodriguez]

How are you using the octothorpe? Was it inserted at the end of the international pattern?  If at the end of the pattern, CCM should know to stop waiting to perform digit analysis once its received since you'll be matching an explicit pattern.

Also, how are you using your translation patterns? I would make sure the called party transformation isn't stripping the #. You want the translated called party number to match your  # international pattern (eg  9.011!#). Speed dial = 3377# --> TxPattern = 33XX#, Prefix= 9011<number> --> RP = 9.011!#

-daniel

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of CarlosOrtiz at bayviewfinancial.com
Sent: Tuesday, March 18, 2008 9:37 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Interdigit Timeout on Translation


I am setting up some speed dials using translation patterns for International locations.  Is there any way to avoid waiting for the inter digit timeout at the end of the pattern?  I thought you could bypass it with the "#" but that does not work.

Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080318/61f8ac1e/attachment.html