[cisco-voip] CallManager password recovery wizard

[Ryan Ratliff]

The purpose of the AdminUtility is to set (change) and sync up the  
private cluster password phrase on all servers in the cluster.    Any  
time you run it and actually set a password you should expect that  
all Cisco services cluster-wide will be restarted.  If you only check  
synchronization then nothing bad will happen.  In my experience if it  
doesn't have to change a password it usually doesn't restart a  
service but if you don't know the password and are setting a new one  
expect the entire cluster to be reset.

-Ryan

On Mar 18, 2008, at 10:46 AM, Leetun, Rob wrote:

The version of CallManager that we are running is 4.1.3.  Yes, the Admin
utility.  I have heard this utility can screw things up in a hurry if it
does not run right.

Thanks.

Rob

-----Original Message-----
From: Jonathan Charles [mailto:jonvoip at gmail.com]
Sent: Tuesday, March 18, 2008 8:40 AM
To: Leetun, Rob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CallManager password recovery wizard

Which one? What version of CCM? Are you referring to the CCM Admin
utility?


Jonathan

On Tue, Mar 18, 2008 at 8:36 AM, Leetun, Rob <rleetun at bouldercounty.org>
wrote:
>
>
>
> Hi,
>
> Has anyone run the CallManager password recovery wizard?  If so, will
it
> allow me to change the private password for a CallManager install?
>
> Thanks.
>
> Rob
>
>
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip