[cisco-voip] Blocking CID

Jorge L. Rodriguez Aguila jorge.rodriguez at netxar.com
Tue Mar 18 13:20:52 EDT 2008


You mean to block the CID on all calls going out from the PD?
If this is what you mean then this might help:

clid strip

To remove the calling-party number from calling-line-ID (CLID) information and to prevent the calling-party number from being presented to the called party, use the clid strip command in dial peer configuration mode. To remove the restriction, use the no form of this command.

clid strip [name]

no clid strip [name]
Syntax Description

name


(Optional) Removes the calling-party name for both incoming and outgoing calls.

Command Default

Calling-party number and name are included in the CLID information.
Command Modes

Dial peer configuration
Command History
Cisco IOS Release

Cisco CME Version

Modification

12.2(11)T


2.01


This command was introduced.

12.2(15)ZJ1


3.0


The name keyword was added.

12.3(4)T


3.0


This command was integrated into Cisco IOS Release 12.3(4)T.

Usage Guidelines

If the clid strip command is issued, the calling-party number is null in the information element, and the presentation indicator is set to "n" to prevent the presentation of the number to the called party.

If you want to remove both the number and the name, you must issue the command twice, once with the name keyword.
Examples

The following example removes the calling-party number from the CLID information and prevents the calling-party number from being presented:

Router(config-dial-peer)# clid strip


The following example removes both the calling-party number and the calling-party name from the caller-ID display:

Router(config-dial-peer)# clid strip

Router(config-dial-peer)# clid strip name


Related Commands
Command

Description

clid network-number


Configures a network number in the router for CLID and uses it as the calling-party number.

clid restrict


Prevents the calling-party number from being presented by CLID.

clid second-number strip


Prevents the second network number from being sent in the CLID information.


Jorge Rodríguez Aguila
CCNA,CCVP
Senior Network Consultant
Netxar Technologies
jorge.rodriguez at netxar.com
Office 787-765-0058
PCS 787-688-8530




-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Tuesday, March 18, 2008 12:56 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Blocking CID

I need to block CID for a Police Dept... I tried setting up route
patterns for *67, but the PRI will not accept them...

Any ideas?



Jonathan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list