[cisco-voip] Call Recording on a VG224 - Analog Phone to Analog Phone

[James Buchanan]

How did you instruct the VG224 to invoke an MTP between the endpoints? 

 

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, March 18, 2008 1:04 PM
To: James Buchanan
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Call Recording on a VG224 - Analog Phone to
Analog Phone

 

We've encountered similar and worked around by config that forces
invoking an MTP between the endpoints.  This requires extra MTP
resources, but does get packets on the wire so they can be recorded.

/Wes

James Buchanan wrote: 

Hello,

 

I have a VG224 with several analog phones configured for SCCP. I am
using a VoIP recording solution where the packets are dumped into an
RSPAN session and ultimately have a SPAN session going to a sniffer port
on the recording server. This works great for most calls, but it would
seem that when one analog phone calls another analog phone, this RTP
stream never hits the switch, and thus is never dumped into the RSPAN
session. Has anyone had success using a VoIP recording solution with a
VG224 in this situation?

 

Thanks,

 

James Buchanan

 


________________________________



 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080318/af093652/attachment.html