[cisco-voip] CME: pressing CFWall needs a # after the internal extension or end call

Paul Choi asobihoudai at yahoo.com
Thu Mar 20 09:14:17 EDT 2008 

Anthony,

Are all of your internal extensions four digits and
starting with 33?

Paul

--- Anthony Kouloglou <akoul at dataways.gr> wrote:


---------------------------------
    Hi all,
this is my config regarding the dial-peer pots and
telephony service.
I don't see any overlapping dial-peers for local
extensions: 33XX

dial-peer voice 1030 pots
 destination-pattern 00T
 direct-inward-dial
 port 0/3/0:15
 prefix 00
!
dial-peer voice 1200 pots
 description ### Connected to FAX-1    ### 
 destination-pattern 3333
 port 2/0/0
!
dial-peer voice 1201 pots
 description ### Connected to FAX-2    ### 
 destination-pattern 3334
 port 2/0/1
!
dial-peer voice 1202 pots
 description ### Connected to FAX-3    ### 
 destination-pattern 3335
 port 2/0/2
!
dial-peer voice 1203 pots
 description ### Connected to FAX-4    ### 
 destination-pattern 3336
 port 2/0/3
!
dial-peer voice 1204 pots
 port 2/0/4
!
dial-peer voice 1205 pots
 port 2/0/5
!
dial-peer voice 1206 pots
 port 2/0/6
!
dial-peer voice 1207 pots
 port 2/0/7
!
dial-peer voice 1208 pots
 direct-inward-dial
 port 2/0/8
!
dial-peer voice 1209 pots
 direct-inward-dial
 port 2/0/9
!
dial-peer voice 12010 pots
 direct-inward-dial
 port 2/0/10
!
dial-peer voice 12011 pots
 direct-inward-dial
 port 2/0/11
!
dial-peer voice 12016 pots
 direct-inward-dial
 port 2/0/16
!
dial-peer voice 12017 pots
 direct-inward-dial
 port 2/0/17
!
dial-peer voice 12018 pots
 direct-inward-dial
 port 2/0/18
!
dial-peer voice 12019 pots
 direct-inward-dial
 port 2/0/19
!
dial-peer voice 12020 pots
 direct-inward-dial
 port 2/0/20
!
dial-peer voice 12021 pots
 destination-pattern 3379
 port 2/0/21
!
dial-peer voice 4000 voip
 description ### Calls to CUE ###
 destination-pattern 4000
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad   
!
dial-peer voice 4001 voip
 description ### MWI ON Number ###
 destination-pattern 4001....
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 4002 voip
 description ### MWI OFF Number ###
 destination-pattern 4002....
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 4010 voip
 description ### Calls to CUE Legacy AA ###
 destination-pattern 4010
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 4011 voip
 description ### Calls to XXXXXX AA ###
 destination-pattern 4011
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 4012 voip
 description ### Calls to Notify Voice Callers For New
Numbers ###
 destination-pattern 4012
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!         
dial-peer voice 4013 voip
 description ### Calls to Notify FAX Callers For New
Numbers ###
 destination-pattern 4013
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 4020 voip
 description ### Calls to CUE Prompt Management ###
 destination-pattern 4020
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 4050 voip
 description ### Calls to CUE Recording Pilot ###
 destination-pattern 4050
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 1031 pots
 destination-pattern 02.........
 direct-inward-dial
 port 0/3/0:15
 prefix 2
!
dial-peer voice 1032 pots
 destination-pattern 06.........
 direct-inward-dial
 port 0/3/0:15
 prefix 6
!
dial-peer voice 4014 voip
 description ### No one is here...Please Call Tomorrow
###
 destination-pattern 4014
 session protocol sipv2
 session target ipv4:10.200.100.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad   
!         
dial-peer voice 1041 pots
 destination-pattern 2.........
 direct-inward-dial
 port 0/3/0:15
 prefix 2 
!         
dial-peer voice 1042 pots
 destination-pattern 6.........
 direct-inward-dial
 port 0/3/0:15
 prefix 6 
!         
dial-peer voice 1050 pots
 destination-pattern 1T
 direct-inward-dial
 port 0/3/0:15
 prefix 1 
!         
dial-peer voice 1051 pots
 destination-pattern 8T
 direct-inward-dial
 port 0/3/0:15
 prefix 8 
!         
dial-peer voice 1 pots
 destination-pattern .
 direct-inward-dial
!

telephony-service
 sdspfarm units 2
 sdspfarm transcode sessions 2
 sdspfarm tag 2 XCODER
 load 7914 S00105000200
 load 7921 CP7921G-1.0.3
 load 7941 SCCP41.8-2-2SR2S
 load 7961 SCCP41.8-2-2SR2S
 load 7975 SCCP75.8-3-2S
 load 7965 SCCP45.8-3-2S
 load 7945 SCCP45.8-3-2S
 load 7936 cmterm_7936.3-3-12-0
 load 7906 SCCP11.8-2-2SR2S
 max-ephones 60
 max-dn 150
 ip source-address 10.200.2.254 port 2000
 system message CME IP Telephony System
 url directories http://10.200.2.254/local-directory
 url services
http://10.200.100.2/voiceview/common/login.do
 url
authenticationhttp://10.200.100.2/voiceview/authentication/authenticate.do
 time-zone 26
 time-format 24
 date-format dd-mm-yy
 dialplan-pattern 1 XXXXXX3310 extension-length 1
 dialplan-pattern 2 XXXXXX3312 extension-length 1
 voicemail 4000
 max-conferences 16 gain -6
 moh music-on-hold.au
 web admin system name admin password system
 dn-webedit 
 time-webedit 
 transfer-system full-consult
 transfer-pattern 02.........
 transfer-pattern 06.........
 transfer-pattern .T
 transfer-pattern 2.........
 transfer-pattern 6.........
 night-service code *123
 night-service day Mon 15:00 20:00
 night-service day Tue 15:00 20:00
 night-service day Wed 15:00 20:00
 night-service day Thu 15:00 20:00
 night-service day Fri 15:00 20:00
 directory last-name-first
 create cnf-files version-stamp 7960 Mar 19 2008
14:31:00
!


dschulz wrote:      Anthony - We'll need somefurther
information to help you determine your issue here. 
First, whatnumber are you trying to use with CFWall
feature, and, what happenswhen you simply dial-it from
the phone.  You may want to compare whatyou are
dialing with your actual dial-plan.  CM will take the
bestmatch after the T302 expires.  Make sure that what
you are dialing doesnot have any overlap (4-5-6 digit
dialpatterns).  
   
  Also, what version ofCallManager are you using?  
(the function of the CSS in the CFWallfeature is
important here in CMv6).  
   
  HTH,
   
  Dave 
  
    
---------------------------------
From:cisco-voip-bounces at puck.nether.net[mailto:cisco-voip-bounces at puck.nether.net]
On Behalf Of AnthonyKouloglou
  Sent: Wednesday, March 19, 2008 12:44 PM
  To: cisco-voip at puck-nether.net
  Subject: [cisco-voip] CME: pressing CFWall needs a #
after theinternal extension or end call
  
  
  Hi, what should i consider looking in myconfig if a
wanted to resolve this problem.
A User presses CFWall, line opens,  presses the 4
digit internalextension and nothing happens.
He/she has to press either # or end call to take the
change.
  
Also, when pressing redial, takes too long (3 secs) to
make the call.
  
Any ideas?
  
Thanks a lot,
Anthony
  > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs

More information about the cisco-voip mailing list