[cisco-voip] Anyone using M$ OCS with CM 4.x?

[Matt Slaga (US)]

In order to make this work, you will need to use Genesys GETS.  It is
actually a bit more than just a SIP trunk.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Friday, March 21, 2008 11:32 AM
To: cisco-voip
Subject: [cisco-voip] Anyone using M$ OCS with CM 4.x?

 

I'm looking at adding  M$ OCS to our Voice network.  Since CM 4.x does
sip trunks....... I was wondering if anyone had done this before?

 

Thanks for any information you can pass along.  I'm not planning to
upgrade to CM 6.1 until this summer.

 

Scott




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080321/d4e63dc8/attachment.html