[cisco-voip] Anyone using M$ OCS with CM 4.x?

[Matt Slaga (US)]

Yes, but you will need an SBC / IP2IP gateway to convert H323 (CCM side)
to SIP (mediation server side), and in most situations DSPs to handle
DTMF.  You will also require a mediation server on the M$ side.

 

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Friday, March 21, 2008 1:43 PM
To: Wes Sisk; Matt Slaga (US); cisco-voip
Subject: Re: [cisco-voip] Anyone using M$ OCS with CM 4.x?

 

just looking to get calls across CM to the PSTN.  Will that work,
without the GETS?

 

Scott

On Fri, Mar 21, 2008 at 9:30 AM, Wes Sisk <wsisk at cisco.com> wrote:

4.x doesn't do presence. you may be able to get calls across, but it
will be extremely limited feature set.

/wes

Scott Voll wrote: 

I'm looking at adding  M$ OCS to our Voice network.  Since CM 4.x does
sip trunks....... I was wondering if anyone had done this before?

 

Thanks for any information you can pass along.  I'm not planning to
upgrade to CM 6.1 until this summer.

 

Scott



________________________________



 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080321/12b37146/attachment.html