[cisco-voip] SIP trunk With CME

[Moataz Mamdouh]

but this is based on CME ver 4.1 , is not supported on ver 3.3 ?

Moataz Mamdouh <moataz_mmdh at yahoo.com> wrote: thanks , it's a good guide

Michael Wilson <mikejww at googlemail.com> wrote: HI there,

You might want to look at the following for setting up a sip trunck with CME.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml
 
Hope this helps.

On 23/03/2008, Moataz Mamdouh <moataz_mmdh at yahoo.com> wrote: dear all
how to male a SIP trunk between a third party call processing system based on SIP
and  cisco call manager express ver 3.3a ,
any ideas?


           

---------------------------------
Never miss a thing.   Make Yahoo your homepage.
 
_______________________________________________
 cisco-voip mailing list
 cisco-voip at puck.nether.net
 https://puck.nether.net/mailman/listinfo/cisco-voip
 


 _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

        

---------------------------------
Be a better friend, newshound, and  know-it-all with Yahoo! Mobile.  Try it now._______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080323/89b11beb/attachment.html