[cisco-voip] CCM6 + SIP phone + Route Pattern

[Alan Su]

Dear All,

I have a CCM6 in vmware configured with:
1. 2 x IP Communicator
2. 2 x SIP softphone (XLite)
3. 2620XM voice gateway (FXO to PSTN, FXS to analog phone)

The communications between IP Communicator and X-Lite are just fine, IP
Communicator can dial to PSTN via gateway with access code (0). But I can't
use X-Lite to dial 0 for outside calls. Does anyone know the difference
between CIPC and X-Lite when dialing PSTN calls? Do I need to configure the
"SIP Route Pattern"? Thanks a lot~

Regards,
Alan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080331/07723635/attachment.html