[cisco-voip] 7931 and CM v4

[Dennis Heim]

7931 requires CUCM 6.x or later.

Dennis Heim
Network Voice Engineer
Berbee
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com
www.berbee.com

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Monday, March 31, 2008 1:38 PM
To: Jenkins, Matthew; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7931 and CM v4

I don't think the 7931 works on v4.x you'll have to check compatibility 
charts.

Also, there is no display on the 7931 lines it's a paper template. You may 
get colours like the 7914 to tell you line state.

----- Original Message ----- 
From: "Jenkins, Matthew" <matthew.jenkins at fairmontstate.edu>
To: <cisco-voip at puck.nether.net>
Sent: Monday, March 31, 2008 12:56 PM
Subject: [cisco-voip] 7931 and CM v4


> Will the 7931 display line state on all 24 buttons with call manager v4?
> We currently can't do line state displays on the 7914, so we've been
> told, with CM4.  Thanks,
>
> Matt
>
> Matthew Jenkins
> Network/Server Administrator
> Fairmont State University
> Visit us online at www.fairmontstate.edu
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip