[cisco-voip] FXO + Paging module

[Bill Talley]

If they tell you that, they don't know what an FXO port is.  We have multiple installs using FXO ports.    Now if you ask for something to interface with a CO port or trunk port, they'll hopefully tell you it's supported.

*** Sent from a mobile device with very tiny keys.  Please excuse my typos. ***


-----Original Message-----
From: "Scot Gossen" <ninergoose at yahoo.com>
To: "Paul" <asobihoudai at yahoo.com>; "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: 05/02/08 11:50 AM
Subject: Re: [cisco-voip] FXO + Paging module

If you call Valcom support they will tell you that they do not sell a device to interface with a cisco FXO port. We typically use the Valcom V9970 with an FXS port.

-Go0se

Paul <asobihoudai at yahoo.com> wrote: Hi folks,

I have an FXO module that is connected to a self-amplified Valcom paging module and when I dial the number associated with the destination pattern that I've associated with that port, I get nothing. I've attached a Bogen PCM2000 to an FXO port before and it worked beautifully. This time I'm having a lot more trouble. If anyone has any suggestions or hints, it'd be much appreciated.

This is a 3845 + VIC2-2FXO running 12.4(9)T4.

This is a CCME box.

Paul



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.

 

Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.