[cisco-voip] 2 phones - 1 DN?

[Matthew Saskin]

Unless I'm missing something, you should just need to set up a standard 
Shared DN between the two devices (7941 and ATA-186).

For the cordless phone connected via the ATA-186, I believe it will need 
to be set up as SCCP and the user will have to learn how to activate 
mid-call services to hold/unhold calls for example.
See: 
http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/user.html#wp1014764

-matt

> We have a 7941 and a traditional cordless phone hooked via ATA with the 
> same DN in one of our offices.
> 
> The goal was to have the cordless available when needed to roam 
> throughout the office.  Ideally a call would be answered on the 7941, 
> placed on hold and then picked up on the cordless to roam throughout the 
> office.  However, sometimes the person may be in a lab connected to his 
> office and have the cordless with him and may need to answer the 
> incoming call from the cordless.
> 
> Any idea of configuration settings on the DN to make this work or other 
> ideas?
> 
> Thanks...
>