[cisco-voip] Minimum Differences - Upgrade 4.1(3) to 6.1(2)

[Matthew Saskin]

Are  you DC Directory or AD integrated?  In either case, the end-user 
password will be set to a default specified for all users during the 
upgrade process - this is a moot point if you are AD integrated.  In 
addition, end-user PIN will be reset to a default specified during install.

There are some intricacies within ccmadmin with respect to setting 
callforward search spaces, make sure to read up on this prior to doing 
the upgrade.

Beyond that, and the aformentioned phone UI changes due to firmware 
updates I can't recall terribly many end-user noticeable changes. 
Granted, I'm probably glossing over something very obvious :)

-matt

Dave Wolgast wrote:
> We are planning an upgrade from CUCM 4.1(3) to 6.1(2) for an enterprise 
> of 2000+ phones.  We want to keep "user-noticeable" differences to a 
> minimum to begin with and roll out new features in a controlled manner, 
> to the groups of people who would benefit most from them.
>  
> I know, for example that the CCMUser page has a different look with new 
> features (CCMUser is only very lightly used by our users).  Also, I know 
> that the "Intercom History" option appears in the directory menu.
>  
> What else is different (for users) if we do an absolutely vanilla DMA 
> install without adding anything? 
> 
> -- 
> Dave Wolgast
> Livonia, NY
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip