[cisco-voip] non cisco USB Flash on ISRs

[Jason Aarons (US)]

They use FAT16 limiting the drive size.

 

http://www.cisco.com/en/US/docs/ios/12_4/cfg_fund/configuration/guide/h_
etokn_ps6350_TSD_Products_Configuration_Guide_Chapter.html

 

http://en.wikipedia.org/wiki/File_Allocation_Table#Final_FAT16

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony
Kouloglou
Sent: Wednesday, May 07, 2008 7:36 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] non cisco USB Flash on ISRs

 

Hi,
has anyone ever has problems using USB flash memories (non cisco
certified) on ISRs (2801, 2811 or 2851)?
I used one 1Gb since CME files could not fit in a 64 MB Compact flash.
I inserted in slot 0, format it as cisco ios wanted, uploaded the files,
shared them with the tftp-server command.
Once the router rebooted and then i could not see the usbflash0!!
All the commands tftp-server were omitted!
After  a reboot, there it was again!






-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080507/27f5063b/attachment-0001.html