[cisco-voip] Old Style Phone Lights

[Jonathan Charles]

This would be a great pain in the butt, but you could create a CSS for
each line that only went to a dedicated analog port on the gateway.

Then... you could have each line be able to ONLY access that line.

The downside here is that you wouldn't be able to do an off-net
conference (easily anyway)...



Jonathan

On Thu, May 8, 2008 at 11:32 AM, Todd Franklin <toddnh65 at gmail.com> wrote:
> I have a setup where I have 10 POTS lines coming into a 2801.
> And at the desks, 7960s with 7914 sidecars.  Each line is on the sidecar.
>
> When people call out, they take one of these 10 lines, and callers call in
> on whatever lines are
>  still available.
>
> Anyway, the previous phone system, you could tell when a line was in use, it
> was lit up.
> Here, if someone calls that line, it lights up, but if I place an outbound
> call, I have no way of knowing which
>  line is no longer available (it doesn't light up on the sidecar).
>
> Not major, but can you think of anyway to 'fix' this for end users that are
> heavily resistant to change??!!
>
> Thanks.
>
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>