[cisco-voip] shared lines autoanswer question

[Ryan Ratliff]

The service parameter "always use primary line" can achieve this but  
is a global parameter.

-Ryan

On May 14, 2008, at 2:37 PM, Rossella Mariotti-Jones wrote:

Hello, is it possible to make shared lines appear on multiple phones  
but set them to not auto-answer? In our old phone system you could  
have other people’s lines appear on your phone but not auto-answer  
the call when you picked up the handset if those lines were flashing  
with an incoming call. Thanks in advance.



***

Rossella Mariotti-Jones

rossella at chemeketa.edu



<image001.png>

Network Analyst, SS - SPIR - IT TAC

desk 503-589-7775 - cell 503-480-4255



**** PRIVILEGED AND CONFIDENTIAL COMMUNICATION  **** This electronic  
transmission, and any documents attached hereto, may contain  
confidential and/or legally privileged information.  The information  
is intended only for use by the recipient named above.  If you have  
received this electronic message in error, please notify the sender  
and delete the electronic message.  Any disclosure, copying,  
distribution, or use of the contents of information received in error  
is strictly prohibited.



<image001.png>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080514/ac0a0d77/attachment-0001.html