[cisco-voip] 7941 Noisy environment options

[Lelio Fulgenzi]

Easiest way would be to install a shared line on an analog port (ATA-186, vg224,vg248, etc) and then hook up a device to that.

We use these:

http://www.cooperwheelock.com/reference/productcatalog.aspx

and they're pretty good.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Java-Clavis-Domus Theorem: The ability to keep your hands on the home keys is inversely
related to the amount of caffeine ingested in the last 30 minutes. 

  ----- Original Message ----- 
  From: Craig Fry 
  To: cisco-voip at puck.nether.net 
  Sent: Thursday, May 15, 2008 11:03 AM
  Subject: [cisco-voip] 7941 Noisy environment options


  We have several areas in the plant where you cannot hear a phone ring.  I can't find anything that would allow me to connect a strobe light or loud bell to the phone.  Is there some way to leverage the AUX port for this?



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080515/b8c2e51b/attachment.html