[cisco-voip] TAPS with UCM 6

[Joe Cisco]

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_0_1/t15taps.html

-Joe C.

On Wed, May 14, 2008 at 11:58 AM, Frazee, Timothy <Timothy_Frazee at adp.com>
wrote:

>  Group,
>
>
>
> I've looked all over cco and I am unable to find any reference as to how to
> configure TAPS with the "free 5 seat uccx" that comes in the UCM 6 bundle.
>
>
>
> Anyone know of any directions that for 6, not 3 or 4?
>
>
>
> Timothy Frazee
>
> Network Solutions
>
> Automatic Data Processing, Inc.
>
> [image: cid:image001.jpg at 01C75517.52D94D10]
>
>
>
> ------------------------------
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and confidential.
> If the reader of the message is not the intended recipient or an authorized
> representative of the intended recipient, you are hereby notified that any
> dissemination of this communication is strictly prohibited. If you have
> received this communication in error, please notify us immediately by e-mail
> and delete the message and any attachments from your system.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080515/22819351/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2092 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080515/22819351/attachment.jpe