[cisco-voip] TAPS with UCM 6

[James Buchanan]

Or take an old laptop, load it with Win2K3, hack the registry, and load
IPCC on it to use just for TAPS.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Thursday, May 15, 2008 7:20 PM
To: Frazee, Timothy
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] TAPS with UCM 6

Well, you need another server, and you need to install IPCC on it,
with your little license thingy... then set up taps...


Jonathan

On Wed, May 14, 2008 at 11:58 AM, Frazee, Timothy
<Timothy_Frazee at adp.com> wrote:
> Group,
>
>
>
> I've looked all over cco and I am unable to find any reference as to
how to
> configure TAPS with the "free 5 seat uccx" that comes in the UCM 6
bundle.
>
>
>
> Anyone know of any directions that for 6, not 3 or 4?
>
>
>
> Timothy Frazee
>
> Network Solutions
>
> Automatic Data Processing, Inc.
>
>
>
> ________________________________
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
confidential.
> If the reader of the message is not the intended recipient or an
authorized
> representative of the intended recipient, you are hereby notified that
any
> dissemination of this communication is strictly prohibited. If you
have
> received this communication in error, please notify us immediately by
e-mail
> and delete the message and any attachments from your system.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip