[cisco-voip] TAPS with UCM 6

[Voice Noob]

All I know is I install w2k3 with IIS and then install SP1. Do my new reg
hacks, which are not the same as the old ones, install the cisco OS updates
and install UCCX 5.0 and start tapping in phones. Maybe that is way more but
it is about the same as I did for the windows 2000 OS.

On Fri, May 16, 2008 at 11:19 AM, Frazee, Timothy <Timothy_Frazee at adp.com>
wrote:

>  No reg hack for Win2k3.
>
>
>
> Theres way more than a reg hack to make it legit for stuff to install.
>
>
>
>
>
>
>
> *From:* Voice Noob [mailto:voicenoob at gmail.com]
> *Sent:* Friday, May 16, 2008 10:45 AM
> *To:* Jonathan Charles
> *Cc:* James Buchanan; cisco-voip at puck.nether.net; Frazee, Timothy
>
> *Subject:* Re: [cisco-voip] TAPS with UCM 6
>
>
>
> I have one as well. I worked for a few hours to get it right but it works
> fine for UCCX. I have not had to install CCM 4.3 so I don't know if that
> works or not.
>
> On Fri, May 16, 2008 at 10:33 AM, Jonathan Charles <jonvoip at gmail.com>
> wrote:
>
> You have a reg hack for 2k3????
>
> Can you send it?
>
>
>
> Jonathan
>
>
> On Thu, May 15, 2008 at 11:13 PM, James Buchanan <jbuchanan at ctiusa.com>
> wrote:
> > No, Win2k3 with IPCC 5.0.
> >
> > -----Original Message-----
> > From: Jonathan Charles [mailto:jonvoip at gmail.com]
> > Sent: Thursday, May 15, 2008 11:11 PM
> > To: James Buchanan
> > Cc: Frazee, Timothy; cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] TAPS with UCM 6
> >
> > You mean Win2k
> >
> >
> > Jonathan
> >
> > On Thu, May 15, 2008 at 10:40 PM, James Buchanan <jbuchanan at ctiusa.com>
> > wrote:
> >> Or take an old laptop, load it with Win2K3, hack the registry, and
> > load
> >> IPCC on it to use just for TAPS.
> >>
> >> -----Original Message-----
> >> From: cisco-voip-bounces at puck.nether.net
> >> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
> >> Charles
> >> Sent: Thursday, May 15, 2008 7:20 PM
> >> To: Frazee, Timothy
> >> Cc: cisco-voip at puck.nether.net
> >> Subject: Re: [cisco-voip] TAPS with UCM 6
> >>
> >> Well, you need another server, and you need to install IPCC on it,
> >> with your little license thingy... then set up taps...
> >>
> >>
> >> Jonathan
> >>
> >> On Wed, May 14, 2008 at 11:58 AM, Frazee, Timothy
> >> <Timothy_Frazee at adp.com> wrote:
> >>> Group,
> >>>
> >>>
> >>>
> >>> I've looked all over cco and I am unable to find any reference as to
> >> how to
> >>> configure TAPS with the "free 5 seat uccx" that comes in the UCM 6
> >> bundle.
> >>>
> >>>
> >>>
> >>> Anyone know of any directions that for 6, not 3 or 4?
> >>>
> >>>
> >>>
> >>> Timothy Frazee
> >>>
> >>> Network Solutions
> >>>
> >>> Automatic Data Processing, Inc.
> >>>
> >>>
> >>>
> >>> ________________________________
> >>> This message and any attachments are intended only for the use of the
> >>> addressee and may contain information that is privileged and
> >> confidential.
> >>> If the reader of the message is not the intended recipient or an
> >> authorized
> >>> representative of the intended recipient, you are hereby notified
> > that
> >> any
> >>> dissemination of this communication is strictly prohibited. If you
> >> have
> >>> received this communication in error, please notify us immediately by
> >> e-mail
> >>> and delete the message and any attachments from your system.
> >>> _______________________________________________
> >>> cisco-voip mailing list
> >>> cisco-voip at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>
> >>>
> >> _______________________________________________
> >> cisco-voip mailing list
> >> cisco-voip at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> ------------------------------
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and confidential.
> If the reader of the message is not the intended recipient or an authorized
> representative of the intended recipient, you are hereby notified that any
> dissemination of this communication is strictly prohibited. If you have
> received this communication in error, please notify us immediately by e-mail
> and delete the message and any attachments from your system.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080516/19af0f00/attachment.html