[cisco-voip] Antw: CUCM 6.1.1 - Mobility Calling Number Issue

[Robert Schuknecht]

Hi Gregor,

i assume your installation is located in germany, right?;-) Does your PSTN connection has the CLIP/CLIR No Screening activated? If not, then the calling No. has to be in range of your PSTN connection.

/Robert

>>> <gweissenfels at gmx.de> schrieb am Mittwoch, 21. Mai 2008 um 13:12 in Nachricht
515caa32773b5199a24badd1a203cf3f:
> Hello Team,
> 
> on our CUCM 6.1.1 we configured the mobility feature with a mobile as a 
> remote destination. The Remote Destination is associated with the line of a 
> Deskphone.
> If somebody calls the Deskphone, the mobile rings after the defined time, 
> but the calling number is not displayed on the mobile. Only a part of the 
> Deskphone number is displayed. On the gateway i can see that the original 
> calling number is sent correctly.
> 
> Any ideas?
> 
> Thank you!
> 
> Greg
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip