[cisco-voip] CCM 5.1.3000.-2 & CP-7971G problem with the transfe

[Aman Chugh]

Malden,

seems to be codec issue with calls disconnecting without being answered but
you mentioned it is intermittent and happens only with 7971g, does the user
dial the complete pstn number to do a transfer or this is site to site
transfer.

Aman


On 5/25/08, Irfan Hashmi <irfanhashmi2008 at yahoo.com> wrote:
>
>  have u configured and cheked your dsp resources?
> iffi
>
>
> ----- Original Message ----
> From: Mladen Milanovic <mmilanovic at ctiusa.com>
> To: cisco-voip at puck.nether.net
> Sent: Saturday, May 24, 2008 9:38:29 PM
> Subject: [cisco-voip] CCM 5.1.3000.-2 & CP-7971G problem with the transfer
>
>  Guys,
>
> Did anyone ever experience following issue:
>
>
>
> User are trying to transfer the call from one phone to another. User
> presses a Transfer softkey and call destination phone. Destination phone
> rings and when user press transfer key again transfer fails. Call stays on
> hold and cannot be transferred. In some cases call disappear from the phone
> but transfer is not successful. This is reported on one remote location and
> issue is intermittent.
>
>
>
>
>
> Any insight will be helpful
>
>
>
> Mladen
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080525/30f32b5c/attachment-0001.html