[cisco-voip] ISDN PRI back to back

[wael ahmed el mezain]

it is PRI normal configuration but under its serial interface make one side as user side (it is user side by deflaut) and the 2nd side as network side.
 
So just add this command (isdn protocol-emulate network) for one of them.


From: khalid_khursheed at hotmail.comTo: cisco-voip at puck.nether.netDate: Mon, 26 May 2008 15:46:10 +0500Subject: [cisco-voip] ISDN PRI back to back


HiI have a couple of 2600 with PRI cards. I have seen post on this forum for back to back PRI. Can any one point out to some tutorial on that, perhaps some sample config. Will it work for data connection as well?regards,khalid

Get news, entertainment and everything you care about at Live.com. Check it out! 
_________________________________________________________________
News, entertainment and everything you care about at Live.com. Get it now!
http://www.live.com/getstarted.aspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080526/b5afe906/attachment.html