[cisco-voip] CUCM 6.x remote shutdown on UPS powerdown !!!

Tue May 27 10:01:27 EDT 2008

thanx wes..

great info..

thanx..

regards..

Sinisa Djokic 

System Engineer
CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified

MDS Informaticki inzenjering
Bul. Arsenija Carnojevica 170
11070 Novi Beograd, Serbia
Tel: +381 11 2015 200, 2015 273
Fax: +381 11 3194 954
www.mds.rs
sdjokic at mds.rs

  _____  

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, May 27, 2008 3:55 PM
To: Djokic Sinisa
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 6.x remote shutdown on UPS powerdown !!!

This is covered in the list archives. may be worth a quick refresher:
Q.  Does Cisco Unified Communications Manager support APC UPS?
A.  From the Cisco Unified Communications Manager 6.0(1b) Release Notes:
Cisco Unified Communications Manager 6.0(1), when running on an MCS 7825-H2
or MCS 7835-H2, supports basic integration to the following UPS models: APC
SmartUPS 1500VA USB and APC 750VA XL USB. Integration is via a single
point-to-point Universal Serial Bus (USB) connection. Serial and SNMP
connectivity to UPS not supported, and the USB connection must be
point-to-point (i.e. no USB hubs). Single and dual USB UPS models are
supported. The feature is normally activated automatically upon bootup if
connected to line power and a connected UPS is detected. Alternatively, on
MCS 7835-H2, running the CLI command "show ups status" will activate the
feature. On either supported server model, the CLI command will also display
detected hardware, detected versions, current power draw, remaining battery
runtime and other relevant status information. Once the feature is
activated, graceful shutdown will commence upon detection of a low battery
threshold. Resumption or fluctuation of power will not interrupt or abort
the shutdown. For unsupported Cisco Unified Communications Manager versions,
MCS models and/or UPS vendor/make/models, the workaround solution is to have
an external script monitor the UPS, and when appropriate conditions are
detected, logon to Cisco Unified Communications Manager via Secure Shell
(SSH), access the CLI and run the "utils system shutdown" command.

/Wes

Djokic Sinisa wrote: 

hi guys..

is there any solution to remotely shutdown unified communications servers
6.x when UPS powers down after it has no power in it..

i know  about software ( for example APC ) for windows to do it..

but what is situation for CUCM and cisco's recommendation in this
situation..

in linux..and of naturally in cisco's enviroment..

i sthere any solution?..

thanx..

regards..

Sinisa Djokic 

System Engineer
CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified

MDS Informaticki inzenjering
Bul. Arsenija Carnojevica 170
11070 Novi Beograd, Serbia
Tel: +381 11 2015 200, 2015 273
Fax: +381 11 3194 954
www.mds.rs
sdjokic at mds.rs

  _____  

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080527/14cb84f6/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3497 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080527/14cb84f6/attachment-0002.gif 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3486 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080527/14cb84f6/attachment-0003.gif 