[cisco-voip] Unity Questions

[Scott Voll]

Since your moving to exchange 2k7 I would look at upgrading to Unity 5.x due
to the compatiblity.

I upgraded to Unity 5.0es21 a few months ago.  I'm UM and currently
partnered with my Exchange 2k3 box.  but we are in the process of migrating
users over to the exchange 2k7 box so I still need to re-partner the Unity
box with Exchange 2k7.  But currently I have two E2k3 backend servers and 1
E2k7 box.

I would just get your Unity 5.x upgrade scheduled because your going to need
to do it.

Scott

On Wed, May 28, 2008 at 7:44 AM, Micah Bennett <mbennett at als-xtn.com> wrote:

>  Chris
>
>
>
> Thanks for the answers.
>
>
>
> If we have the top level of Cisco support (software and hardware) should
> the upgrade to Unity 5 (and conversion of the license) be supported as long
> as our Unity 4 Hardware meets the requirements?
>
>
>
> What is the "TSP"?
>
>
>
> If we have two exchange servers and set up the bridge as you mentioned, I
> assume that the Unity only cares about the server it is linked directly to.
> Ex:  Unity 4 is linked to our Ex2000 box.  Ex2000 box is bridged to Ex2007
> box.  Should this work or does Unity 5 need to be used?
>
>
>
> Starting to work on a plan for the merge of two networks, keeping our CCM /
> Unity / IPCCx system for then end system.  Just trying to examine all the
> "Gotcha's".
>
>
>
> *Micah Bennett*
>
>
>  ------------------------------
>
> *From:* Chris Clouse [mailto:Chris.Clouse at cdw.com]
> *Sent:* Wednesday, May 28, 2008 9:32 AM
> *To:* Micah Bennett
> *Subject:* RE: [cisco-voip] Unity Questions
>
>
>
>
>
> See inline…
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Micah Bennett
> *Sent:* Wednesday, May 28, 2008 8:55 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Unity Questions
>
>
>
> Hello all
>
> A few questions about Unity
>
> We are running Unity 4.2 linked to our Exchange 2000 server for Unified
> Messaging.
>
> Is there any type of matrix that shows what versions of Unity are
> compatible with which versions of Exchange? There really isn't any huge
> defining change for the versions of Exchange.   Unity 4 can run on either
> 2000 or 2003.  You will just install the Exchange System Tools for the
> appropriate version.  If you are running Ex07, then you will need Unity 5.
>
> Is there a risk that if I upgrade my Unity version, it may not be
> compatible with my CCM version?  If I am looking at a potential upgrade to
> my CCM version this also means a potential upgrade to my IPCCX version. No.
> The absolute most you would need to change would be the TSP.
>
> Can a single Unity server be linked to two different Exchange servers
> (different Exchange versions as well on each)?Unity, no.  But through
> Exchange routing, yes it can.  You will need to make one of the Exchange
> servers the Bridgehead for which Unity uses to communicate with.  The
> communication to the other server is handled with Exchange routing.
>
> Thanks.
>
> *Micah Bennett*
>
> Telecommunications Admin
>
> *Automated License Systems*
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080528/46a0c569/attachment.html