[cisco-voip] ATA 186 and pulse dial?

[Frazee, Timothy]

What about a FXS port on a router? I know the cost is totally different
than an ATA, but if you really need the feaure.....

 

 

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marcelo Zilio
Sent: Thursday, May 29, 2008 3:28 PM
To: Madziarczyk, Jonathan
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ATA 186 and pulse dial?

 

According to this doc, it doesn't support...

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15/english/
administration/guide/h323/h3288CH2.html
"The telephone must be switched to tone setting (not pulse) for the
Cisco ATA to operate properly."

Madziarczyk, Jonathan escreveu: 

Cisco's search is down at the moment.

 

Does anyone know if the ATA 186 supports pulse dialing (like an old
rotary phone)?  It'll save me some money if it does.

 


________________________________



 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  
 


________________________________



 
 
No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.100 / Virus Database: 269.24.3/1472 - Release Date:
29/5/2008 07:27
  

 



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080530/7bcdeede/attachment.html>