[cisco-voip] Bulk Change Directory Number

[Adam]

It's CCM 4.2(1) so AXL is available... i guess I'll just have to cobble
together some sort of script to take care of it. I had already thought about
that on the CM side... I wasn't sure about the Unity side though... can I
just edit the table and restart the Unity services?

On Fri, May 30, 2008 at 11:19 AM, Mordechai <m.rabinovich at nves.ca> wrote:

>  What ver of CCM are you running? I would use AXL to make changes like
> that.
>
>
>
> Mord
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Adam
> *Sent:* Friday, May 30, 2008 12:07 PM
> *To:* cisco-voip at puck-nether.net
> *Subject:* [cisco-voip] Bulk Change Directory Number
>
>
>
> I have about 400 extensions to change from an old DID number to a new DID.
> We actually want to change the directory number on the phone and in Unity
> rather than use translation patterns to route the new numbers. Is there any
> good way of making this change without manually editing a bunch of phones
> and unity mailboxes? I believe this is something outside of the scope of
> what the BAT tool can do for updating lines.
>
> Thanks,
> Adam
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.24.4/1474 - Release Date: 5/30/2008
> 7:44 AM
>
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.24.4/1474 - Release Date: 5/30/2008
> 7:44 AM
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080530/fe5a7df7/attachment.html>