[cisco-voip] DND on only one Line possible?

[gweissenfels at gmx.de]

Hello Ryan,

thank you for the hint ;-)

regards
Gregor



-------- Original-Nachricht --------
> Datum: Wed, 5 Nov 2008 10:01:34 -0500
> Von: "Ryan Ratliff" <rratliff at cisco.com>
> An: gweissenfels at gmx.de, cisco-voip at puck.nether.net
> Betreff: RE: [cisco-voip] DND on only one Line possible?

> Ring settings can definitely be set per line.  You can do this via
> CCMAdmin
> or CCMUser. 
> 
> 
> -Ryan 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
> gweissenfels at gmx.de
> Sent: Wednesday, November 05, 2008 9:54 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] DND on only one Line possible?
> 
> Hello!
> 
> Is it possible to suppress the ringtone only for one line?
> 
> Example, 2 Lines on one 7961 Phone:
> 
> Line 1 Number 440 <- this Line should only Flash on incoming call Line 2
> Number 441 <- this Line should Ring normally
> 
> The Lines are in different partitions.
> 
> Any ideas ?
> 
> Thanks in advance,
> Gregor
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip