[cisco-voip] CISCO SWITCH 3560

[Matlock, Kenneth L]

CAT3560LMC-BRDGS#sho env temperature status
Temperature Value: 35 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 49 Degree Celsius
Red Threshold    : 59 Degree Celsius

This is on 12.2(44)SE2

Ken Matlock
Network Analyst
(303) 467-4671
matlockk at exempla.org

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Toledo
Sent: Tuesday, November 11, 2008 1:29 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO SWITCH 3560

Thanks,

3560-01#show env temperature status
Temperature Value: Not Supported
Temperature State: Not Supported

I got this in other words no temperature sensor..

David

-----Original Message-----
From: Doug McIntyre [mailto:merlyn at geeks.org] 
Sent: Tuesday, November 11, 2008 3:16 PM
To: David Toledo
Subject: Re: [cisco-voip] CISCO SWITCH 3560

On Tue, Nov 11, 2008 at 12:03:56PM -0500, David Toledo wrote:
> I'M TRYING TO GET A TEMPERATURE MONITOR FROM MY 3560 CISCO SWITCH AND
IS
> NOT WORKING
> 
> I BROWSE AND WALK IN THE SNMP AND I CAN NOT SEE TO FIND IT. HOW DO CAN
> FIND THE RIGHT

I don't think the 3560 has a temperature monitor..

c3560-1.bdr.mpls#show env temperature status
Temperature Value: Not Supported
Temperature State: Not Supported

If there's not one via CLI, there probably won't be any via SNMP either.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip