[cisco-voip] Inter Cluster Shared Lines

[Ryan Ratliff]

CFA won't work because forwarding settings are ignored when a call is routed
to a DN via hunt list/line group.  
 
Other than just registering the shared lines to to the same cluster (really
sccp doesn't take a ton of bandwidth) the remote destination route is what
you'll have to do.  
 
Another option would be to send the call to some application that makes an
outbound call to both destinations and bridges in whichever one that answers
with the caller.  
 

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fuermann, Jason
Sent: Wednesday, November 12, 2008 10:14 AM
To: 'Matthew Saskin'; 'Lewis, Chris'
Cc: 'Joe Pollere (US)'; 'cisco-voip at puck.nether.net'
Subject: Re: [cisco-voip] Inter Cluster Shared Lines



Right, we use DN's not associated to phones that CFA to other numbers
(albeit not to a different cluster). That's not the exact setup you're going
for but I think the rest should just fall into place

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Saskin
Sent: Wednesday, November 12, 2008 9:03 AM
To: Lewis, Chris
Cc: cisco-voip at puck.nether.net; Joe Pollere (US)
Subject: Re: [cisco-voip] Inter Cluster Shared Lines

 

Make sure when you create a DN with it not being tied to a device that the
"Active" option is selected.

-matt

On Wed, Nov 12, 2008 at 9:25 AM, Lewis, Chris <Chris.Lewis at magnetar.com>
wrote:

Yep.

 

Appreciate your help though

 

Thanks

 

  _____  

From: Joe Pollere (US) [mailto:Joe.Pollere at us.didata.com] 

Sent: 12 November 2008 14:24


To: Lewis, Chris; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Inter Cluster Shared Lines

 

Ok it was worth a shot.

 

From: Lewis, Chris [mailto:Chris.Lewis at magnetar.com] 
Sent: Wednesday, November 12, 2008 9:23 AM
To: Joe Pollere (US); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Inter Cluster Shared Lines

 

I have tried it.

 

If the line isn't associated with a device you get a fast busy.  If you
associate it with a device and have CFA set to a line on a different
cluster, it rings only on the local device and mot the remote cluster - Even
though when you ring the line normally, it will forward to the remote
cluster with no issues.

 

 

 

  _____  

From: Joe Pollere (US) [mailto:Joe.Pollere at us.didata.com] 
Sent: 12 November 2008 14:20
To: Lewis, Chris; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Inter Cluster Shared Lines

Ok how about using dummy phones then.

 

From: Lewis, Chris [mailto:Chris.Lewis at magnetar.com] 
Sent: Wednesday, November 12, 2008 9:16 AM
To: Joe Pollere (US); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Inter Cluster Shared Lines

 

 

Thanks for that.

 

I don't think you can add CTI Route Points to Line Groups (to use in Hunt
Groups) but if I am wrong then please let me know.

 

 

 

  _____  

From: Joe Pollere (US) [mailto:Joe.Pollere at us.didata.com] 
Sent: 12 November 2008 13:58
To: Lewis, Chris; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Inter Cluster Shared Lines

Just a thought not sure if it would actually work but could you set up Route
Points with the CFA set to the number on the New Cluster then make the route
points members of a broadcast hunt group?

 

Joe

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lewis, Chris
Sent: Wednesday, November 12, 2008 5:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Inter Cluster Shared Lines

 

Are you able to use shared lines across clusters on UCM 6.1.2?

 

IE  If  I have a Dn 5555 which rings across multile phones simultaneously
wihtin a single cluster at present (UCM4.1) , if I change to separate
clusters (due to location and bandwidth requirements) when I migrate to UCM
6.1.2 can this still be achieveable?

 

If not then does anyone have any suggestions as to how I can utilise a
"hotline"number for all users across multile clusters?

 

Thanks

 

Chris

 
The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.
  _____  


Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

 
The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.
  _____  


Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

 
The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.
  _____  


Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081112/d9c54352/attachment-0001.html>