[cisco-voip] whats the trick for 7914 in CM 6.1

Tue Nov 18 13:28:24 EST 2008

On the device configuration page did you specify which modules were installed on the phone?  After that, the user should be able to enter speed dials and they will show up on the 7914.

Damien Ball
Network Engineer
A+, CCNA, ACDT, ACTC
Granville County Schools
Technology Department
101 Delacroix St.
Oxford, NC 27565
Office:  (919) 693-4613
Fax:  (919) 693-7391

>>> On Tue, Nov 18, 2008 at 12:51 PM, in message <449cb1210811180951m4b3f8c30t4ca790eb45db9e14 at mail.gmail.com>, "James Grace" <grace.jd at gmail.com> wrote:

Is there something special i need to do when configuring a 7961 with the 7914 add on mod.  all of the lines show as none

--
James Grace
CCVP CCNP CCNA MCSE MCDBA
System Engineer / Consultant
Email: grace.jd at gmail.com

MSN IM: grace.jd at gmail.com

***************************************************************************************************
The Granville County School System does not discriminate on the basis of race, color, national origin, gender, disability, religion, or age in its programs or activities. If you have an inquiry regarding the nondiscrimination policies, please contact: Assistant Superintendent for Human Resources and Operations Granville County Schools, Oxford, North Carolina 27565, 919-693-4613. http://www.gcs.k12.nc.us 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081118/cb5f5577/attachment.html>