[cisco-voip] TCL script.... more then one on a VGW

[Scott Voll]

and how do I do that?  just add the once script to the top of the other?

I didn't make the scripts.

Scott

On Tue, Nov 18, 2008 at 12:48 PM, Tim Smith <thsglobal at gmail.com> wrote:

> Cant you combine the scripts? To make a super CNAME and ANI Blocking
> script?
>
> Cheers,
>
> Tim.
>
>   On Tue, Nov 18, 2008 at 9:26 PM, Scott Voll <svoll.voip at gmail.com>wrote:
>
>>   aaaaaaaaaaaaahhhhhhhhhhh!
>>
>> I have a CMM blade and CNAME support is in 12.4.20T last I heard.  so an
>> VGW upgrade is my only choice.
>>
>> <rant> once again, I buy a product that is being EoS. </rant>
>>
>> Thanks
>>
>> Scott
>>
>>   On Tue, Nov 18, 2008 at 12:07 PM, Robert Kulagowski <rkulagow at gmail.com
>> > wrote:
>>
>>> Scott Voll wrote:
>>>
>>>> I have a Cname TCL script on my h323 gateway and now I would like to
>>>> also add a TCL script for blocking calls.  How do I add more then one TCL
>>>> script to a dial-peer?
>>>>
>>>
>>> We couldn't find a way to do it, so we had to switch to an IOS that
>>> supported native H.323 CNAME for those locations where we had to block more
>>> than 15 numbers.
>>>
>>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081118/4f96687a/attachment.html>