[cisco-voip] how to change CM 6.1 timezone

[Gokhan Arslan (Mühendis, DEVOTEAM-SECURA)]

Hi James,

On CUCM CLI you can set the time zone of the system,

---------------------------------------------------------------------------------------------

admin:set timezone ?
Syntax:
set timezone zone
zone     mandatory   This is the new timezone. Enter the appropriate string
                     or zone index id to uniquely identify the timezone.
                     A list of valid timezones can be obtained via the
                     following CLI command: show timezone list.

---------------------------------------------------------------------------------------------

Dundar Gokhan Arslan
Network Engineer
Unified Communications

e-posta: garslan at secura.com.tr

direkt: (90) 212 315 05 36

faks: (90) 212 233 23 52

Teknolojiyi işinizle bütünleştiriyoruz.
________________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace [grace.jd at gmail.com]
Sent: Wednesday, November 19, 2008 3:34 AM
To: CiscosupportUpuck
Subject: [cisco-voip] how to change CM 6.1 timezone

I have a CM 6.1 that will not connect to a NTP source   so now im manually configuring the time.  But i notice the the server timezone is wrong.

--
James Grace
CCVP CCNP CCNA MCSE MCDBA
System Engineer / Consultant
Email: grace.jd at gmail.com<mailto:grace.jd at gmail.com>

MSN IM: grace.jd at gmail.com<mailto:grace.jd at gmail.com>