[cisco-voip] Drop and Insert w/ PRI and Data

[Mike Louis]

I have a client that wants to continue using their D&I solution with a single T1. Today they have a T1 terminating into a CPE that splits voice and data between their key system and a router. I think its actually SIP based VOIP on the backend but thats another story. Lets assume it basic Drop and Insert.

So they basically they would like to have their data and voice come into a single 2811 router with a MFT-T1 DI card from the provider. They believe that the provider can give them X channels for Data and the rest of the channels for voice on a DI card. I have never heard of a DI card terminating the voice channels on the DSPs for some channels and then being able to use the other channels for data. I have seen it where we can terminate the data channels on the router and then TDM connect the voice back into a PBX but in that case we don't involve DSPs as we would with a PRI terminating on the GW.

Is this possible?



________________________________
Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081120/f97a324e/attachment.html>