[cisco-voip] CUE GUI

[Nick]

I have a 2851 with CUE-NME module installed on
IOS c2800nm-ipvoicek9-mz.124-15.T7, I have configured the module as shown

interface Integrated-Service-Engine1/0
 ip unnumbered GigabitEthernet0/0
 service-module ip address 10.196.243.14 255.255.255.0
 service-module ip default-gateway 10.196.243.1
 no keepalive
!
ip route 10.196.243.14 255.255.255.255 Integrated-Service-Engine1/0

I have also enable sip-ua and added a sip dial-peer, what should the
destination -pattern point to under this dialpeer?

I can ping the module but I am unable to browse to the GUI, can anyone help
with what I could be missing?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081125/74da501e/attachment.html>