[cisco-voip] CUE GUI

[Nick]

10.196.243.11 255.255.255.0

Regards

Nick
2008/11/25 Anthony Kouloglou <akoul at dataways.gr>

> Hi Nick,
> what is the gi0/0 ip address and mask?
>
> Anthony
>
> Nick wrote:
>
>   I have a 2851 with CUE-NME module installed on
> IOS c2800nm-ipvoicek9-mz.124-15.T7, I have configured the module as shown
>
> interface Integrated-Service-Engine1/0
>  ip unnumbered GigabitEthernet0/0
>  service-module ip address 10.196.243.14 255.255.255.0
>  service-module ip default-gateway 10.196.243.1
>  no keepalive
> !
> ip route 10.196.243.14 255.255.255.255 Integrated-Service-Engine1/0
>
> I have also enable sip-ua and added a sip dial-peer, what should the
> destination -pattern point to under this dialpeer?
>
> I can ping the module but I am unable to browse to the GUI, can anyone help
> with what I could be missing?
>
>
>
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081125/5d2287e6/attachment.html>