[cisco-voip] Directed Call Park Status is not Changing

[Matthew Loraditch]

I've got a set of Directed Call Park numbers and they were working fine on about 6 or so phones, Everyone could see when a call had been parked... Now they are only lighting up on the phone they were parked on. The only change made was the reversion number, before it was blank, now it's a hunt pilot. I am on CUCMBE 6.1.2. Phones are 41/61s using 8.3.4SR1 Firmware.

Any Ideas? I'm thinking of upping the firmware to 841SR2 as a start and if that doesn't work, TAC


Matthew Loraditch
10944 Beaver Dam Road, Suite A
Hunt Valley, Maryland  21030
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081126/eebca826/attachment.html>