[cisco-voip] cisco-voip Digest, Vol 60, Issue 22
Mike Lydick
mike.lydick at gmail.com
Thu Oct 2 16:36:37 EDT 2008
You may need to change the host name from the CLI. I had to use the set
network hostname after discovering I could not ping the new host name from
the CLI. UCM 6.1.2.
Mike
On Thu, Oct 2, 2008 at 4:28 PM, <cisco-voip-request at puck.nether.net> wrote:
> Send cisco-voip mailing list submissions to
> cisco-voip at puck.nether.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://puck.nether.net/mailman/listinfo/cisco-voip
> or, via email, send a message with subject or body 'help' to
> cisco-voip-request at puck.nether.net
>
> You can reach the person managing the list at
> cisco-voip-owner at puck.nether.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of cisco-voip digest..."
>
>
> Today's Topics:
>
> 1. Re: Outbound Dial with Carrier SIP Trunk (Wilusz, Mike)
> 2. Re: Outbound Dial with Carrier SIP Trunk (Ryan West)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 2 Oct 2008 16:20:05 -0400
> From: "Wilusz, Mike" <mikewilusz at pricechopper.com>
> Subject: Re: [cisco-voip] Outbound Dial with Carrier SIP Trunk
> To: "Ryan West" <rwest at zyedge.com>, "Matt Slaga \(US\)"
> <Matt.Slaga at us.didata.com>, <cisco-voip at puck.nether.net>
> Message-ID:
> <CF128CB1374E15468AF9D1A2219BE71354D755 at EXCHANGE.golub.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Ryan,
>
>
>
> There's no required authentication for the provider (username/password).
> The show command just shows empty.
>
>
>
> Thanks everyone for the input so far in case I forgot to say that!
>
>
>
> Mike Wilusz, CCNA
>
> Networking Systems Programmer
>
> Price Chopper Supermarkets / The Golub Corporation
>
> From: Ryan West [mailto:rwest at zyedge.com]
> Sent: Thursday, October 02, 2008 4:17 PM
> To: Wilusz, Mike; Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Are you required to register your sip-ua? If so, please also post 'show
> sip-ua reg stat'
>
>
>
> -ryan
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wilusz, Mike
> Sent: Thursday, October 02, 2008 4:11 PM
> To: Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Matt,
>
>
>
> Tried that and I still get the same result. The voice config from the
> CUBE is this:
>
>
>
> voice service voip
>
> address-hiding
>
> allow-connections h323 to h323
>
> allow-connections h323 to sip
>
> allow-connections sip to h323
>
> allow-connections sip to sip
>
> !
>
> dial-peer voice 2 voip
>
> destination-pattern 1..........
>
> session protocol sipv2
>
> session target ipv4:64.206.114.6 (Carrier Gateway)
>
> dtmf-relay rtp-nte
>
> codec g711ulaw
>
> !
>
> dial-peer voice 3 voip
>
> destination-pattern 3474179896
>
> session protocol sipv2
>
> session target ipv4:10.50.120.33 (Our CUCM)
>
> dtmf-relay rtp-nte
>
> codec g711ulaw
>
> !
>
> !
>
> sip-ua
>
> registrar ipv4:64.206.114.6 expires 3600
>
>
>
>
>
> Mike Wilusz, CCNA
>
> Networking Systems Programmer
>
> Price Chopper Supermarkets / The Golub Corporation
>
>
>
> From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
> Sent: Thursday, October 02, 2008 4:06 PM
> To: Wilusz, Mike; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Try adding this to your config:
>
>
>
> voice class codec 1
>
> codec preference 1 g711ulaw
>
> codec preference 2 g729br8
>
> codec preference 3 g729r8
>
>
>
>
>
> And to your voip dial peers:
>
>
>
> voice-class codec 1
>
>
>
>
>
>
>
>
>
> From: Wilusz, Mike [mailto:mikewilusz at pricechopper.com]
> Sent: Thursday, October 02, 2008 3:42 PM
> To: Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Yup... set here in this dial-peer. Which is matched properly according
> to the debug.
>
>
>
> dial-peer voice 2 voip
>
> destination-pattern 1..........
>
> session protocol sipv2
>
> session target ipv4:64.206.114.6
>
> dtmf-relay rtp-nte
>
> codec g711ulaw
>
>
>
>
>
> Mike Wilusz, CCNA
>
> Networking Systems Programmer
>
> Price Chopper Supermarkets / The Golub Corporation
>
>
>
> From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
> Sent: Thursday, October 02, 2008 3:40 PM
> To: Wilusz, Mike; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Where are you setting the codec? The line below says you are not using
> VCC, are your dial peers specifying a codec?
>
>
>
> Oct 2 10:21:18: //10/36ECCAF0801A/SIP/Info/sipSPIGetCallConfig: Not
> using Voice Class Codec
>
>
>
>
>
>
>
>
>
> From: Wilusz, Mike [mailto:mikewilusz at pricechopper.com]
> Sent: Thursday, October 02, 2008 3:35 PM
> To: Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Matt,
>
>
>
> Not sure what means. I see g726r32 is selected as a codec...but why? I
> don't have the set as my codec on the dial-peer and the carrier is set
> (or supposed to be) to the same as me. I guess I'm not really sure what
> that line is telling me.
>
>
>
> Mike Wilusz, CCNA
>
> Networking Systems Programmer
>
> Price Chopper Supermarkets / The Golub Corporation
>
>
>
> From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
> Sent: Thursday, October 02, 2008 3:14 PM
> To: Wilusz, Mike; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Probably this:
>
>
>
>
>
> Oct 2 10:21:18: //9/36ECCAF0801A/SIP/Info/sipSPISelectDynamicPayload:
> Selecting Dynamic Payload : 96 for Codec: g726r32
>
>
>
>
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wilusz, Mike
> Sent: Thursday, October 02, 2008 10:31 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
>
>
> Hey All,
>
>
>
> We're in the process of trialing a SIP trunk solution from our provider,
> PAETEC. I followed the Cisco docs for configuring a CUBE, but we can
> only receive calls and not place them. The setup is CUCM 6.1(2) -> SIP
> Trunk -> CUBE (2811) -> SIP Trunk -> PAETEC SIP Gateway. I'm very new
> to SIP and am trying to analyze the output from debug ccsip all.
> Nothing is jumping out at me as the exact reason why the calls outbound
> from our CUCM aren't working. Anybody have any ideas?
>
>
>
>
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee,
> you are hereby notified that you have received this communication in
> error and that any use or reproduction of this email or its contents is
> strictly prohibited and may be unlawful. If you have received this
> communication in error, please notify us immediately by replying to this
> message and deleting it from your computer. Thank you.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20081002/527d7561/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Thu, 2 Oct 2008 16:28:13 -0400
> From: Ryan West <rwest at zyedge.com>
> Subject: Re: [cisco-voip] Outbound Dial with Carrier SIP Trunk
> To: "Wilusz, Mike" <mikewilusz at pricechopper.com>, "Matt Slaga (US)"
> <Matt.Slaga at us.didata.com>, "cisco-voip at puck.nether.net"
> <cisco-voip at puck.nether.net>
> Message-ID:
> <6E21B2BDEF6E714EA0B5BA8D5D0E140163BF5B96 at zy-ex1.zyedge.local>
> Content-Type: text/plain; charset="us-ascii"
>
> Try adding this to your config:
> Dial-peer voice 2 voip
> progress_ind setup enable 3
> progress_ind connect enable 8
>
>
> -ryan
> From: Wilusz, Mike [mailto:mikewilusz at pricechopper.com]
> Sent: Thursday, October 02, 2008 4:20 PM
> To: Ryan West; Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Ryan,
>
> There's no required authentication for the provider (username/password).
> The show command just shows empty.
>
> Thanks everyone for the input so far in case I forgot to say that!
>
> Mike Wilusz, CCNA
> Networking Systems Programmer
> Price Chopper Supermarkets / The Golub Corporation
> From: Ryan West [mailto:rwest at zyedge.com]
> Sent: Thursday, October 02, 2008 4:17 PM
> To: Wilusz, Mike; Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Are you required to register your sip-ua? If so, please also post 'show
> sip-ua reg stat'
>
> -ryan
>
> From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Wilusz, Mike
> Sent: Thursday, October 02, 2008 4:11 PM
> To: Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Matt,
>
> Tried that and I still get the same result. The voice config from the CUBE
> is this:
>
> voice service voip
> address-hiding
> allow-connections h323 to h323
> allow-connections h323 to sip
> allow-connections sip to h323
> allow-connections sip to sip
> !
> dial-peer voice 2 voip
> destination-pattern 1..........
> session protocol sipv2
> session target ipv4:64.206.114.6 (Carrier Gateway)
> dtmf-relay rtp-nte
> codec g711ulaw
> !
> dial-peer voice 3 voip
> destination-pattern 3474179896
> session protocol sipv2
> session target ipv4:10.50.120.33 (Our CUCM)
> dtmf-relay rtp-nte
> codec g711ulaw
> !
> !
> sip-ua
> registrar ipv4:64.206.114.6 expires 3600
>
>
> Mike Wilusz, CCNA
> Networking Systems Programmer
> Price Chopper Supermarkets / The Golub Corporation
>
> From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
> Sent: Thursday, October 02, 2008 4:06 PM
> To: Wilusz, Mike; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Try adding this to your config:
>
> voice class codec 1
> codec preference 1 g711ulaw
> codec preference 2 g729br8
> codec preference 3 g729r8
>
>
> And to your voip dial peers:
>
> voice-class codec 1
>
>
>
>
> From: Wilusz, Mike [mailto:mikewilusz at pricechopper.com]
> Sent: Thursday, October 02, 2008 3:42 PM
> To: Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Yup... set here in this dial-peer. Which is matched properly according to
> the debug.
>
> dial-peer voice 2 voip
> destination-pattern 1..........
> session protocol sipv2
> session target ipv4:64.206.114.6
> dtmf-relay rtp-nte
> codec g711ulaw
>
>
> Mike Wilusz, CCNA
> Networking Systems Programmer
> Price Chopper Supermarkets / The Golub Corporation
>
> From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
> Sent: Thursday, October 02, 2008 3:40 PM
> To: Wilusz, Mike; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Where are you setting the codec? The line below says you are not using
> VCC, are your dial peers specifying a codec?
>
> Oct 2 10:21:18: //10/36ECCAF0801A/SIP/Info/sipSPIGetCallConfig: Not using
> Voice Class Codec
>
>
>
>
> From: Wilusz, Mike [mailto:mikewilusz at pricechopper.com]
> Sent: Thursday, October 02, 2008 3:35 PM
> To: Matt Slaga (US); cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Matt,
>
> Not sure what means. I see g726r32 is selected as a codec...but why? I
> don't have the set as my codec on the dial-peer and the carrier is set (or
> supposed to be) to the same as me. I guess I'm not really sure what that
> line is telling me.
>
> Mike Wilusz, CCNA
> Networking Systems Programmer
> Price Chopper Supermarkets / The Golub Corporation
>
> From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com]
> Sent: Thursday, October 02, 2008 3:14 PM
> To: Wilusz, Mike; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Probably this:
>
>
> Oct 2 10:21:18: //9/36ECCAF0801A/SIP/Info/sipSPISelectDynamicPayload:
> Selecting Dynamic Payload : 96 for Codec: g726r32
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Wilusz, Mike
> Sent: Thursday, October 02, 2008 10:31 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Outbound Dial with Carrier SIP Trunk
>
> Hey All,
>
> We're in the process of trialing a SIP trunk solution from our provider,
> PAETEC. I followed the Cisco docs for configuring a CUBE, but we can only
> receive calls and not place them. The setup is CUCM 6.1(2) -> SIP Trunk ->
> CUBE (2811) -> SIP Trunk -> PAETEC SIP Gateway. I'm very new to SIP and am
> trying to analyze the output from debug ccsip all. Nothing is jumping out
> at me as the exact reason why the calls outbound from our CUCM aren't
> working. Anybody have any ideas?
>
>
>
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> https://puck.nether.net/pipermail/cisco-voip/attachments/20081002/5f425031/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> End of cisco-voip Digest, Vol 60, Issue 22
> ******************************************
>
--
Best Regards,
Mike Lydick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081002/6838297a/attachment-0001.html>
More information about the cisco-voip
mailing list