[cisco-voip] DID numbers for T-1 CAS circuit

Wes Sisk wsisk at cisco.com
Thu Oct 2 22:57:13 EDT 2008


yes.  biggest loss will be calling name id and calling number id.  
calling number id available if fgd is offered but you will be doing 
h.323 and not mgcp.

/wes

On 10/2/2008 10:35 PM, Voice Noob wrote:
>
> I have primarily worked with PRI's when installing digital voice 
> circuits. I am working with a local Telco that cannot provide a PRI 
> and can only provide a T-1 CAS circuit. My question is can I have 
> multiple numbers associated to that circuit like I can with a PRI? I 
> may have a block of 500 DID numbers on a PRI can I have this same 500 
> numbers on a single T-1 CAS circuit?
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081002/8fc518e2/attachment.html>


More information about the cisco-voip mailing list