[cisco-voip] After Hours Hunt Group
Johnny Crothers
Johnny.Crothers at btinet.bt.com
Fri Oct 3 07:42:36 EDT 2008
You could have the following.. if I understand correctly.
On the Gateways (Assuming that they are all external calls) CSS have two
partitions (as well as the rest as standard) the first partition is the
out of hours partition, followed by the partition that all the phones
are in. Then have a translation pattern matching all inbound calls(using
masks) that translates to a hunt group pilot.
So, the after hours partition is never used until the time that the
after hours partition becomes active, when its active translates all
calls into the hunt group.
Not 100% on this, haven't got a lab to test it out on :-)
Hope it helps!
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of William Roy
Sent: 03 October 2008 06:07
To: svr.file at gmail.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] After Hours Hunt Group
In your original question are you actually asking if after a certain
about of time the call is ringing the call goes off to a hunt group or
at a certain time of day? I may have misunderstood your original
request.
regards
________________________________
From: markju at gmail.com [markju at gmail.com] On Behalf Of
svr.file at gmail.com [svr.file at gmail.com]
Sent: Friday, 3 October 2008 12:09 PM
To: William Roy
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] After Hours Hunt Group
Can this be archived at a particular time of the day, automatically?
Thanks.
2008/10/3 William Roy <William.Roy at l7.com.au>
Set the destination of the main line numbers Call Forward No Answer to
the pilot of the hunt group.
regards,
Wil
________________________________
From: cisco-voip-bounces at puck.nether.net
[cisco-voip-bounces at puck.nether.net] On Behalf Of svr.file at gmail.com
[svr.file at gmail.com]
Sent: Friday, 3 October 2008 8:13 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] After Hours Hunt Group
Hi guys,
I have a question regarding how to configure CUCM6 to use a Hunt Group
automatically for a group of phones.
Is it possible to configure CUCM so that after a set time the phones
automatically forward all main line calls to a Hunt Group?
Thanks.
______________________________________________________________
This message has been scanned for all viruses by BTnet VirusScreen.
The service is delivered in partnership with MessageLabs.
This service does not scan any password protected or encrypted
attachments.
==============================================================
______________________________________________________________
This message has been checked for all viruses by BTnet VirusScreen.
The service is delivered in partnership with MessageLabs.
This service does not scan any password protected or encrypted
attachments.
==============================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081003/155f2d1b/attachment-0001.html>
More information about the cisco-voip
mailing list