[cisco-voip] CAS T1

[Joe Cisco]

Yes, with caveats.  Your telco must support it and it must be
configured as e&m-fgb. Also, previously a Cisco AS53xx was required
for the voice gateway, however I don't know if that has changed with
newer IOS versions on the newer gateways.

-Joe C.


On Mon, Oct 6, 2008 at 12:59 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> Good day all--
>
> Can you get Caller ID down a CAS T1?  What are the requirements if so.
>
> Can you have DID sent down a CAS T1?
>
> Does CER play well with a CAS T1?
>
> This area does not have PRI service and I've never worked with a CAS T1 so
> any info / opinions would be good.
>
> Thanks
>
> Scott
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>