[cisco-voip] What would cause DTMF not to go through

[James Buchanan]

The rtp-nte is used typically for SIP trunks. H245-alphanumeric is what
you would typically use. Have you determined this to be for one specific
user or is it more widespread?

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, October 07, 2008 2:01 PM
To: Dave_Landsiedel at bobcat.com
Cc: cisco-voip-bounces at puck.nether.net; cisco voip
Subject: Re: [cisco-voip] What would cause DTMF not to go through

 

H323

 

What's the difference between 

 

 dtmf-relay h245-alphanumeric

 

and 

 

dtmf-relay rtp-nte h245-alphanumeric 

??

 

CMM blade with IOS 12.4(15)T4

 

Thanks

 

Scott

On Tue, Oct 7, 2008 at 11:09 AM, <Dave_Landsiedel at bobcat.com> wrote:


If using dial peer voice voip via a H323 gateway make sure you have the
following line in that dial peer. 

  dtmf-relay rtp-nte h245-alphanumeric 
 
_________________________________ 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081007/f67f809f/attachment.html>