[cisco-voip] BLF ccmuser Speed dials?

[Scott Voll]

What a bunch of (well you can fill in the blank)

Scott

On Tue, Oct 7, 2008 at 12:01 PM, James Buchanan <jbuchanan at ctiusa.com>wrote:

>  Users cannot setup BLF speed dials. Only administrators can.
>
>
>
> I quote the UC 7.X SRND:
>
>
>
> Unified CM supports the ability for a speed dial to have presence
> capabilities via a busy lamp field (BLF) speed dial. BLF speed dials work as
> both a speed dial and a presence indicator. However, only the system
> administrator can configure a BLF speed dial; a system user is not allowed
> to configure a BLF speed dial.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Tuesday, October 07, 2008 1:58 PM
> *To:* cisco voip
> *Subject:* [cisco-voip] BLF ccmuser Speed dials?
>
>
>
> is there something special you have to do to allow CCMUsers to setup BLF
> Speed dials?  They have went in and setup all the speed dials and the
> buttons are configured as BLF Speed dials.   but I get nothing on the phone
> display.
>
>
>
> any ideas?
>
>
>
> Thanks
>
>
>
> Scott
>
>
>
> PS. CM 6.1.2 (7971w7914) 8.4.1 firmware
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081007/f84467dd/attachment-0001.html>