[cisco-voip] No incoming calls

[srini]

Hi All,

 We got a problem in Incoming calls, we need dail 3 to 4 times to the endpoints and  5th time call get connect.

Any one got idea , what would be the problem ? 


Q931 Debug :

Oct  9 14:49:24: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8  callref = 0x619C 
 Sending Complete 
 Bearer Capability i = 0x8090A3 
  Standard = CCITT 
  Transfer Capability = Speech  
  Transfer Mode = Circuit 
  Transfer Rate = 64 kbit/s 
 Channel ID i = 0xA98382 
  Exclusive, Channel 2 
 Calling Party Number i = 0x2181, '624793743' 
  Plan:ISDN, Type:National 
 Called Party Number i = 0xA1, '348741358' 
  Plan:ISDN, Type:National 
 High Layer Compat i = 0x9181
Oct  9 14:49:24: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref = 0xE19C 
 Cause i = 0x80AA - Switching equipment congestion


Dail-Peer Setup 

dial-peer voice 10 pots
 destination-pattern .T
 progress_ind setup enable 3
 progress_ind progress enable 8
 direct-inward-dial
 port 0/0/0:15
 forward-digits all
!
dial-peer voice 1 voip
 huntstop
 destination-pattern 348741...
 progress_ind setup enable 3
 progress_ind alert enable 8
 progress_ind progress enable 8
 session target ras
 dtmf-relay h245-alphanumeric
 codec g723r63
 clid network-number **********



Thanks

Srin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081009/40185cf9/attachment.html>