[cisco-voip] Enable faststart for H323 gateway

David Lin david.eco at msn.com
Thu Oct 9 16:21:31 EDT 2008


Yes, I checked the box of "use MTP". MTP has been added to the MRG as Media Resources.
The call reached the destination but dropped after one time ring. 
I also tried to send the call to CiscoAS5350. The call completed but got one way audio. IP phone (behind the NAT) can't hear anything.
 



Subject: RE: [cisco-voip] Enable faststart for H323 gatewayDate: Thu, 9 Oct 2008 15:24:28 -0400From: jbuchanan at ctiusa.comTo: Matt.Slaga at us.didata.com; david.eco at msn.com; cisco-voip at puck.nether.net






Did you check the box “Use MTP”? Also, what is the MRGL set for the gateway? Does that contain an MTP?
 


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matt Slaga (US)Sent: Thursday, October 09, 2008 1:42 PMTo: David Lin; cisco-voip at puck.nether.netSubject: Re: [cisco-voip] Enable faststart for H323 gateway
 
In order to enable fast start, you must have MTP resources available.  They can be software resources on a UCM server.
 


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David LinSent: Thursday, October 09, 2008 2:28 PMTo: cisco-voip at puck.nether.netSubject: [cisco-voip] Enable faststart for H323 gateway
 
Hi guys,I am using CUCM 6.01 and created a gateway by using H.323. I enabled the faststart in the gateway configuration page but it doesn't take effect. The H.323 Gateway always got Fast start Off and Tunnelling Off and the calls all failed.Can any body tell me how to enable Fast start and Tunnelling?Thank you. David     



Upgrade to Hotmail Plus and share more photos with bigger attachments. Click here to find out how Click here to find out how



Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 
_________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081009/053e5c82/attachment-0001.html>


More information about the cisco-voip mailing list