[cisco-voip] What would cause DTMF not to go through

[James Buchanan]

What version of dspware are you running? I've had issues with the
version recently with a 3825.

 

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Thursday, October 09, 2008 3:25 PM
To: James Buchanan
Cc: Dave_Landsiedel at bobcat.com; cisco-voip-bounces at puck.nether.net;
cisco voip
Subject: Re: [cisco-voip] What would cause DTMF not to go through

 

more wide spread.  They are G711, but thus far it's just one location
(multiple users) but they are the only ones that are using 7962 phones
and firmware 8.4.1.  Also.  I see a bunch of bugs for DTMF but they are
all related to SIP / CTI but these users are not using either of those.

 

Any more ideas?

 

Scott

On Tue, Oct 7, 2008 at 12:05 PM, James Buchanan <jbuchanan at ctiusa.com>
wrote:

The rtp-nte is used typically for SIP trunks. H245-alphanumeric is what
you would typically use. Have you determined this to be for one specific
user or is it more widespread?

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, October 07, 2008 2:01 PM
To: Dave_Landsiedel at bobcat.com
Cc: cisco-voip-bounces at puck.nether.net; cisco voip
Subject: Re: [cisco-voip] What would cause DTMF not to go through

 

H323

 

What's the difference between 

 

 dtmf-relay h245-alphanumeric

 

and 

 

dtmf-relay rtp-nte h245-alphanumeric 

??

 

CMM blade with IOS 12.4(15)T4

 

Thanks

 

Scott

On Tue, Oct 7, 2008 at 11:09 AM, <Dave_Landsiedel at bobcat.com> wrote:


If using dial peer voice voip via a H323 gateway make sure you have the
following line in that dial peer. 

  dtmf-relay rtp-nte h245-alphanumeric 
 
_________________________________ 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081009/fc9d990d/attachment.html>