[cisco-voip] CUCM and SPA3102 SIP Trunk

[Matt Slaga (US)]

The SPA3102 should register as a SIP endpoint, not a SIP trunk.  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
svr.file at gmail.com
Sent: Sunday, October 12, 2008 7:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM and SPA3102 SIP Trunk

 

I need some help to configure CUCM and a SPA3102 SIP trunk as I want to
use the SPA3102 as an FXS port to connect an analog phone to call
manager.

Basically what I have configured is the SIP IP address on the SPA3102 to
the CUCM and a SIP trunk on CUCM to the IP address of the SPA3102,
created an extension for the phone but I get a busy signal?

Thanks.




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081013/4a229861/attachment.html>