[cisco-voip] utilization reports on a T1 PRI connection

[Voll, Scott]

I'm using H323

________________________________
From: Mordechai [mailto:m.rabinovich at nves.ca]
Sent: Tuesday, October 14, 2008 9:12 AM
To: Voll, Scott
Cc: 'Cisco VoIPoE List'
Subject: RE: [cisco-voip] utilization reports on a T1 PRI connection

HI,

Are you backhauling call processing to the CallManager? The reason I am asking is that from what I saw when the control is given to the callmanager there is no way to get utilization info off the gateway and the only way to get it is polling perfcounters (windows or axl depending on ccm version).

The gateways in my case are CMM modules. I am going to check the new 3845 just to see if it's a matter of a platform and not backhauling but my feeling is that it will be the same for 3845.

Regards,

Mordechai
________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Monday, October 13, 2008 5:15 PM
To: 'Carlos Ortiz'; 'Chris Clouse'
Cc: Cisco VoIPoE List
Subject: Re: [cisco-voip] utilization reports on a T1 PRI connection

We are currently using the graph / template at the bottom of this link.

http://forums.cacti.net/viewtopic.php?t=20443

Scott

Internal Virus Database is out of date.
Checked by AVG - http://www.avg.com
Version: 8.0.173 / Virus Database: 270.7.6/1712 - Release Date: 10/7/2008 9:41 AM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081014/444fa934/attachment.html>